

Align the paper stack against the right side of the rear tray and slide the paper guide so that it just touches the left edge of the stack.Ĭheck4 Make sure media type and paper size settings match with loaded paper.Ĭheck5 Make sure that there are not any foreign objects in the rear tray. To troubleshoot this issue I recommend reseating the ink cartridges and performing one more cleaning process. When you load the paper, load the paper with the print side facing UP. Hi LeeRex, I understand your PIXMA MP210 is not applying color ink to paper. In such cases, reduce the amount of paper you load at a time to less than half of the paper load limit.Īlways load the paper in portrait orientation, regardless of the printing orientation. However, paper may not feed correctly at the maximum capacity, depending on the type of paper or environmental conditions (very high or low temperature and humidity). When loading two or more sheets of paper, make sure the paper stack does not exceed the paper load limit. When loading two or more sheets of paper, align the edges of the sheets before loading the paper. Load paper properly to resume the print process.Check2 When loading paper, consider the following. Power the printer on and confirm that the Alarm lamp is off.Īny jammed paper that remains inside the printer should eject automatically. To prevent injury or damage to the unit, avoid touching the internal parts.

If torn paper remains inside the printer, open the scan unit (printer cover) to remove it. Load the paper properly in portrait orientation to resume the print process.Ĭlear paper jams from the rear tray or paper output slot: The printer feeds the paper, ejects the jammed paper. If it touches the internal parts, this may cause a machine failure.
